|
| | | FUEL TREATMENT
Enviro-Safe Fuel Treatment will provide your system with the added protection required for gas or diesel winter driving. When the temperature dips below freezing, gas and diesel fuel can freeze or gel in the system. Enviro-Safe Fuel Treatment will prevent freezing in fuel lines when used within manufacturer's specifications.
Enviro-Safe Fuel Treatment is a premium performance, anti-gel fuel treatment designed for use in commercial, heavy-duty agriculture, marine, and automotive vehicles.
The continuous use of Enviro-Safe Fuel Treatment will clean your gas or diesel engine system from tank to engine. It will return your engine back to the power it had when it was new. The engine may experience rough idle during initial use, but this is only temporary and will dissipate with continued use. Your engine will soon return to a smooth idle and could result in more miles per gallon. After the use of the first bottle, the ratio for use is 1 ounce per 10 gallons of fuel.
Enviro-Safe Fuel Treatment is compatible with gasoline and diesel fuel and protects your fuel to -45°F.
Fuel Treatment 16oz (Each) - $3.75 BUY NOW Fuel Treatment 16oz (Case/12) - $41.00 BUY NOW Fuel Treatment 32oz (Each) - $7.00 BUY NOW Fuel Treatment 32oz (Case/9) - $59.00 BUY NOW Fuel Treatment 64oz (Each) - $11.75 BUY NOW Fuel Treatment 64oz (Case/6) - $67.00 BUY NOW Fuel Treatment Gallon Jug (Each) - $23.00 BUY NOW Fuel Treatment Gallon Jug (Case/4) - $85.00 BUY NOW
ENGINE BLOCK SEALANT
Enviro-Safe Engine Block Sealant will repair most blown engine head gaskets and minor cracks in the engine block when used according to directions. Engine Block Sealant does not harm coolant systems or aluminum or steel engine parts and it will stop leaks in minutes. This 32 oz container is enough for 1 automobile or small truck diesel engine.
Engine Block Sealant 32oz (Each) - $8.75 BUY NOW Engine Block Sealant 32oz (Case/9) - $70.00 BUY NOW
INDUSTRIAL OIL LUBE ADDITIVE
Industrial Oil Lube Additive will provide your equipment with added protection in high heat area applications. Simply add it to the oil lube of equipment, hydraulic tanks, gear boxes and transmissions. The use of this product will allow units to run smoother, longer, cooler and with reduced wear on internal parts. Industrial Oil Lube Additive can also be used in many industrial applictions.
Industrial Oil Lube Additive is an ideal product to add to hydraulic tanks where heat is a problem or concern. The use of this product reduces heat by up to 15 degrees or more by reducing friciton from bearings and other metal-to-metal contact.
When used in industrial applications, you will see a drop in amps and heat. Simply add to lube of equipment in hydraulic holding tank and see a smoother, longer, cooler unit.
Industrial Oil Lube 8oz (Each) - $5.50 BUY NOW Industrial Oil Lube 8oz (Case/20) - $100.00 BUY NOW Industrial Oil Lube 16oz (Each) - $9.75 BUY NOW Industrial Oil Lube 16oz (Case/12) - $107.00 BUY NOW Industrial Oil Lube 32oz (Each) - $19.15 BUY NOW Industrial Oil Lube 32oz (Case/9) - $135.00 BUY NOW Industrial Oil Lube 64oz (Each) - $25.85 BUY NOW Industrial Oil Lube 64oz (Case/6) - $145.00 BUY NOW Industrial Oil Lube Gallon Jug (Each) - $45.90 BUY NOW Industrial Oil Lube Gallon Jug (Case/4) - $173.00 BUY NOW
MOTOR OIL ADDITIVE
Engines in today's world have become very complex with very close tolerances. As engines operate, friction is created from metal-to-metal contact. The metal- to-metal contact results in wearing of metal components.
Motor Oil Additive provides a protective coating to your engines internal parts and with continued use, friction wear will be reduced, providing longer life, smoother operation, lower engine temperature, better engine performance, reduced oil consumption and engine down time.
The increase in horsepower is due to less friction and, therefore, extends the life of lubricated internal engine parts.
Enviro-Safe Motor Oil Additive contains no silicone, graphite, moly or Teflon and is completely compatible with synthetic or petroleum oils. For best results add to oil after an oil change.
Motor Oil Additive 8oz (Each) - $5.25 BUY NOW Motor Oil Additive 8oz (Case/20) - $90.00 BUY NOW Motor Oil Additive 16oz (Each) - $9.45 BUY NOW Motor Oil Additive 16oz (Case/12) - $105.00 BUY NOW Motor Oil Additive 32oz (Each) - $18.15 BUY NOW Motor Oil Additive 32oz (Case/9) - $135.00 BUY NOW Motor Oil Additive 64oz (Each) - $24.85 BUY NOW Motor Oil Additive 64oz (Case/6) - $145.00 BUY NOW Motor Oil Additive Gallon Jug (Each) - $45.90 BUY NOW Motor Oil Additive Gallon Jug (Case/4) - $173.00 BUY NOW
PRO-TECT COOLING SYSTEM TREATMENT
Pro-tect has been specifically designed to restore the protective qualities of the coolant in the cooling system of your vehicle. Scientific tests have shown that poorly maintained cooling systems are the main reason for over 40% of all engine failures. Pro-Tect radiator treatment is for all heavy duty, light duty, diesel engines, gas and stationary engines.
Scale build-up, rust, and corrosion build-up can cause overheating, lack of sufficient cooling and can lead to mechanical failure. Remember, Pro-tect, provides total protection without flushing your system. This product removes rust, scale, stops cavitation erosion, and prevents corrosion in metals, such as aluminum, lead solder joints, steel copper and maintains the proper ph. There is no need to replace your anti-freeze. There is a savings on disposal fees with the added plus that it removes oil from your antifreeze.
Most anti-freeze/summer coolants sold today contain many chemicals and additives that stop and control solids that accumulate in the coolant for a period of time which is normally one to three years. After that period of time, is when you need to be concerned.
Pro-Tect provides you with superior corrosion protection, eliminates anti-freeze change, and maintains proper pH.
Pro-Tect can also be used in Diesel engines. It eliminates cavitation that causes the loss of a wet liner.
Easy to use - just one treatment for every 50,000 milers or 1,200 hours of operation for most vehicles. The size of your extra large capacity cooling systems could require additional treatment.
Pro-Tect CST Gallon Jug (Each) - $28.00 BUY NOW Pro-Tect CST Gallon Jug (Case/4) - $100.00 BUY NOW
POWER STEERING FLUSH Power Steering Flush is the professionals and do-it-yourselfers choice for cleaning the impurities from the power steering pump, steering assembly, and rack assembly units.
It removes contaminates such as sludge, varnish, and metal particles. Power Steering Flush also eliminates slow response from the power steering unit in cold weather.
Power Steering Flush 8oz (Each) - $3.00 BUY NOW Power Steering Flush 8oz (case/20) - $54.00 BUY NOW
POWER STEERING ENHANCER PLUS
In order to obtain maximum performance, Enviro-Safe recommends the use of Enviro-Safe Power Steering Flush to be followed up by Power Steering Enhancer Plus. Power Steering Enhancer Plus is specially formulated with seal conditioners that restores dry seals to "like new" condition and, therefore, stopping leakage associated with bad seals and "o" rings.
Not only does it eliminate the slow, "jerky" response in cold weather steering of the vehicle, but it also reduces that annoying whine noise that comes from the power steering pump.
Power Steering Enhancer Plus contains an additive to clean varnish, shellac and grime from systems.
Power Steering Enhancer Plus 8oz (Each) - $6.50 BUY NOW Power Steering Enhancer Plus 8oz (Case/20) - $130.00 BUY NOW
AUTOMATIC TRANSMISSION CONDITIONER
In today's fast paced world, automotive transmissions generate tremendous heat production under normal operation conditions. The heat is produced by extreme pressure from the transmission bushings, bearings and gears. Extreme high temperature can lead to premature failure of an automatic transmission. These failures occur more often when the vehicle is pulling boats, trailers, campers, etc.
The use of Enviro-Safe Automatic Transmission Conditioner will reduce friction and heat that is produced in the bushings, bearings and gears and will eliminate most normal transmission annoyances. In most cases, Automatic Transmission Conditioner will reverse the ill effects of the heat production and return the transmission to useable service.
Automatic Transmission Conditioner was formulated to include specialized cleaners to remove oil contaminates like varnish, lacquer and dirt accumulation from within the tranmission's valve body, clutch pac and governors simply by daily driving of the automobile. As these impurities are loosened from the transmission, they are trapped by the filter.
Automatic Transmission Conditioner contains no PTFE Silicones, polymers or moly and will not harm the tranmission clutch.
Automatic Transmission Conditioner does not claim to repair or remove broken metal particles that become lodged or imbedded in valve, governors or the clutch pac.
Automatic Transmission Conditioner 8oz (Each) - $5.75 BUY NOW Automatic Transmission Conditioner 8oz (Case/20) - $105.00 BUY NOW
TRANSMISSION PLUS
Transmission Plus is a state-of-the-art conditioner and stop leak in one. You get the superior performance of Enviro-Safe Automatic Transmission Conditioner, which allows smoother shifting, removes varnish build-up, and adds lubrication, with the bonus of a stop leak for seals. The stop leak conditions seals and then swells them, restoring the to "Near New" condition. This prevents transmission fluid from leaking, thus fixing most transmission leaks.
Transmission Plus 8oz (Each) - $6.25 BUY NOW Transmission Plus 8oz (Case/20) - $115.00 BUY NOW
AIR TOOL OIL
Air Tool Oil was engineered for use in all piston and rotary type air tools. Increased power and speed, in addition to smoother operation, will be noted when operating your air tools.
Air Tool Oil should be used in air impact wrenches, ratchet, wrenches, air nailers, nail staplers, hammers, snaders, grinders, drills, saws, etc. For automotive, industrial and home use.
Air Tool Oil 8oz (Each) - $2.75 BUY NOW Air Tool Oil 8oz (Case/20) - $45.00 BUY NOW Air Tool Oil 16oz (Each) - $4.50 BUY NOW Air Tool Oil 16oz (Case/12) - $50.00 BUY NOW
|